A bespoke custom RDA made in diameters from 14mm to 22mm with your choice of airflow size or AFC made by hand to work as a dripper or a squonk atty, this is the Nutz atty. It’s so simple and yet works so well, it’s like a vintage sports car, they don’t make them like this any more, but in this case they do.
Nutz attys have been popular for quite a while in the UK squonk scene and for good reason. The Nutz is easily the simplest atty we have ever reviewed. It has extremely clean lines and doesn’t have a single o-ring. The top cap threads onto the build deck with pretty long threads, this stops any chance of leaking but also adds to the experience of using it. You feel like you are unthreading a serious piece of equipment every time you remove the top cap. It’s a solid chunk of steel, tough yet not overly heavy. The Nutz is lathed by hand and you can feel it, there are little details like the bevelling of edges that breathe the love and care take by the Modder (Ionut John). Each atty is custom ordered for size and draw, ours is a 20mm, Slammed (even more condensed chamber), 2mm Fixed Airflow, with the BF pin. These attys shine as squonkers. They are small with little to no juice well, dripping is possible but much more friendly to a quick squonk every couple hauls. The BF pin is press fit with a Peek insulator, so you need to make a choice from the onset, there is no dual purpose available here. The Build deck is a blast from the past, one centre post and a negative screw on the base of the deck. In the end, the Nutz is down right bullet proof.
Flavour is very, very good. This is what has made Nutz so popular. The chamber is so condensed and the airflow is dialled in to your personal preference. The threaded top cap allows for worry free squonking. Your wicks get incredibly saturated and full with flavour. Nail your build for your temp and enjoy flavour nirvana.
Airflow is what you make it, literally. You order the size air hole you like making it perfectly tailored to you. We wanted a nice restricted lung hit, a 2mm hole does the trick perfectly. Coil placement is a simple side alignment for best flavour.
Building the Nutz isn’t crazy but we wouldn’t say super easy either. The simple deck with one post isn’t too bad if you place your coil with steady hands and take your time. The screws are nice solid quality with good heads and threads. You need to fully wrap your leads around the screws for the best set. When you first get your Nutz you need to get a feel for where the airhole lands when fully screwed down (good news, it never shifts around) so you have optimal coil position. Our favourite build is a simple, 24 awg, 5 wrap, spaced, 2.5mm coil, coming in at 0.4 ohms and run at about 35-40W. It’s a killer vape with a nice warmth to it. Don’t over wick this one, a nice little donut of cotton with room left close to the post for your juice to flow is the trick. Changing you cotton is a snap, the coil sits pretty parallel to the deck making wick placement an easy, quick task.
Juice Capacity is limited, it’s a tiny deck/chamber, we get about 5-6 nice long hauls before you need to re-squonk/re-drip. As a squonker it’s not issue and the pressure to refill is pretty light.
Ordering your very own bespoke Nutz is a real treat. Ionut is a super nice guy, he manages your expectations (timing, costs, shipping, etc…) and works with you to get you the best possible atty for your vape style. Knowing that this atty is hand spun on a lathe somewhere in Romania gives it a provenance that you remember and cherish every time you use it. You could easily make the Nutz your one and only squonk atty and call it quits (on the search). The Nutz is a timeless atty that delivers tasty vapor like a dream.
Legendary atty from a legendary moder. Ionut does things his way by hand and excels because of it. You can feel the handmade touch in every part of these. His hybrids are also excellent. I have 3 of his excellent attys from the pit list days ; )
When waiting time’s were long and demand high. It was all part of the fun, the buzz and they are all worth the wait. Tiny reduced chamber lovely threaded top cap 1mm air hole… beautiful flavour either as dripper or a squonk rda.
Couldnt say anything more positive
5 stars from me ( if the option below wold let me change it!!!!)
Hey,
thanks for the teaser. Is this at top the Drip Tipp or is it possible to attach a 510 one.
Hey David,
Yeah all Nutz take standard 510 drip tips…